No. The Pro Max 100ft adapter for DeckTok Permanent Outdoor Lights Pro Max supports a maximum total length of 150ft.
If you purchase one Pro Max 100ft set and one Pro Max 50ft set and connect them in series, you must use the Pro Max 100ft adapter. Using a Pro Max 50ft adapter may cause the lights not to turn on.
You need to open the DeckTok APP and adjust the number of LEDs to match the total connected length.For example, when the total length is 150ft, set the LED count to 90 LEDs in the app.
Otherwise, the lights beyond the default setting will not turn on.
As long as both conditions below are met:
The distance between any two lights must not exceed 3 m (9.8 ft)
(including the adapter to controller, controller to first light, and between light strings).
The total length after the controller must not exceed 169.7 ft.
Maximum extension cable length:
Pro Max 50ft set: up to 4 m (13.1 ft)
Pro Max 100ft set: up to 8 m (26.2 ft)
Pro Max 150ft set: up to 6 m (19.7 ft)
Use the "Countdown" function in the app to set daily schedules. Contact us if this does not work.
Yes, but the cut is permanent and the strands cannot be reconnected. The cut end MUST be properly sealed and insulated to prevent short circuits.
